Double Head Sheet Metal Nibbler Cutter, XINYI Nibbler Metal Cutting Drill Hole Saw Attachment Tool,360 Degree Tackle Car Repair Metal Sheet With Plastic Rack

Description

Operation Requirements and Accessories replacement method


1.knife blade at the end of the regular refueling, especially cutting aluminum plate is particularly important.
2. first to open the drill, after cutting, the end of the first exit after the turn off the drill.
3 Cutting tool rod cut must be kept perpendicular to the cut workpiece in case of hard wrenches broken knife head.
4 Knife Pole replacement: Open the cover, remove the loose nut, loosen the tightening screws, pull out the knife rod with pliers, reload the knife rod, lime tighten screws can.


Specification for use of sheet openings
1 when the plate opener is used, the first front and the cutter of the drill are inserted into the hole of the hole, so that the cutter is connected with the electric drill and locked. Then the three sticks on the shelf, the stigma screws lime tight, to prevent the opening of the shelf sliding, the ruler to the left and right positioning pin into the small square hole in the rack, and finally according to the size of the cut arc, Adjust and tighten the top screw, fixed the ruler to ensure the accuracy of cutting round hole.
2 cutting standard arc, should use thin plate openings, to keep the arc section smooth and beautiful, but also in the work of drilling a 3 mm positioning eye, and then drill a 12 mm hole, the knife head into the hole inside and outside the circle of cutting.