Freehawk Red Dot Laser Bore Sighter BoreSighter Kit for .22 to .50 Caliber Rifle Scope Gun Red Dot Boresight Kit Set Tools Accessory-0.22 to 0.50 Bore Sight Kit (.22-.50)

Description

Boresight Kits for 0.22 to 0.50 Caliber Rifles, Handguns and Scopes.

Save ammunition and time when sighting your rifles or shotguns thanks to this laser boresighter.

Instructions:

1. Find the holes on side of laser end, stick tool in there to center.

2.Slide it in, mark where the laser hits the paper.

3.Rotation:
※ Do FIRST HALF rotation. Then mark that spot. Then adjust the laser and bring it from spot 2 on the paper to halfway between the two spots. Then mark where it is now.
※ Do SECOND HALF rotation.If it falls on the third spot in the middle, you re done.
If it s a little off, adjust half the distance to the spot, should be minimal adjustment at this point.
Then rotate one half turn twice to make sure it falls back on that spot.

4.YES! WHEN YOU ROTATE IT WILL GO AWAY FROM THE SPOT, THEN IT LANDS BACK ON IT.
WHERE IT LANDS AFTER HALF ROTATION IS WHAT MATTERS, NOTHING ELSE AT ANY POINT IN THE ROTATION.

5.Now that your bore site laser is centered to your barrel, get behind the weapon and adjust your windage and elevation to be centered on that dot.
Make sure you re at the right distance for this process.
If you do this correctly, you re done! You can go out and shoot, there should be no need to shoot to adjust.

Package Includes:

1 x Laser bore-sighter
1 x Screwdriver
1 x Spare screw
1 x Allen wrench
4 x Adapter tips 1 x Padded storage box
6 x AG13 batteries (3 spares)

Specifications:

Max. Output Power: < 5mW
Weight: 1.34 oz / 38 g
Material: Aluminum
Length: 6.1" / 155 mm
Length of rod that fits into the barrel: 2.4"- 3.5" / 60 mm - 90 mm (tapered)
Head Diameter: 16 mm
Tail Diameter: 5 mm
Laser Wavelength: 635 - 655 nm
Power: 3 AG13 batteries