Ninja PCP REGULATOR 3,000 PSI Output For Air Rifle - Not Paintball

Description

FILLING THE NINJA PCP REGULATOR The NINJA PCP Regulator system is equipped with the industry standard "QD Style" fill fitting, which allows your NINJA PCP Regulator system to be refilled either on or off the marker. The NINJA Regulator system may be filled with either Clean, Dry Compressed Air or nitrogen. UNDER NO CIRCUMSTANCES SHOULD THE NINJA PCP REGULATOR SYSTEM BE FILLED WITH PURE OXYGEN. OXYGEN WILL IGNITE CAUSING INJURY OR DEATH When filling your NINJA PCP Regulator system do not exceed the pressure rating shown on NINJA PCP REGULATOR System CYLINDER S LABEL. DO NOT APPLY OR INJECT OIL OF ANY TYPE TO THE FILL OR BURST DISC PORTS. OIL WILL VAPORIZE AND POSSIBLY IGNITE DURING THE FILL PROCEDURE CAUSING INJURY OR DEATH It is important to keep dirt, oil and water out of your NINJA PCP Regulator system. Most regulator failures are due to dirt or contamination. Always keep a cover on the fill nipple when you are not filling the NINJA PCP Regulator system. If you use compressed air, make sure that the compressor providing that air is equipped with WORKING filters and moisture separators. CONNECTING YOUR NINJA PCP REGULATOR SYSTEM SLOWLY Screw your NINJA PCP Regulator system into the Series 3000 PCP Station UFA. Reference the fill station owner s manual.