Outdoor/Indoor Digital HDTV Antenna-ANTOP Flat Panel Smartpass Amplified Antenna with Noise-Free 4G LTE Filter for VHF Enhanced, 60/70 Miles Multi-Directional Reception, 39ft Detachable Coaxial Cable

Description

✅Disclaimer
Channel reception quality will vary depending on what s being broadcast in your area, how far away you are from broadcast towers, and your surroundings.
Always re-scan channels after moving the indoor antenna, the result may be better. BEFORE PURCHASING this antenna,
please CHECK OUT what channels are available in your area via: dtv.gov/maps.



✅Specification:
Frequency range: VHF:87.5-230MHz, UHF:470-862MHz
Gain: VHF:32dB ;UHF:36dB
Max Output Level: 100dBμV Max
Impedance: 75Ω
Noise figure: ≤3.5dB
Reception Pattern: Multi-directional
Polarization: Horizontal/Vertical
Smart Switch - Off: non-amplified
Smart Switch - On: amplified with DC 12V via power adapter
Size: 10.23 x 4.72 x 23.46in

✅If your outdoor TV antenna is not working as expected, try the following tips:
1, Check to make sure you have correctly connected the antenna to your HDTV or third-party HD receiver.
2, Re-scan for channels: In the TV s setup menu, set the mode to indoor antenna or air. Refer to the TV manual for detailed instructions.
3, Reposition the amplifier antenna in a different location. It is suggested place it higher on a attic or outside. Sometimes moving a few feet can make a difference.
4,You can receive Hi-V signals when you install the detachable rods.

✅What s in the box
1*AT-400BV FLAT PANEL Smartpass Amplified Digital Outdoor/Indoor TV Antenna
1*Power Inserter with Smart Switch
1*AC/DC Power Adapter
1*Indoor Stand
2*VHF Enhanced Rods
1*39ft Coaxial Cable
1*Wall Mounting Pole Clamp Kits Bracket
1*Instruction/User Manual