PowMr 60amp 48V 36V 24V 12V Auto MPPT Solar Charge Controller Max 190VDC Input LCD Backlight Solar Charge for Vented Sealed Gel NiCd Lithium Battery (60A)

Description

MPPT-60A
Tips The load output is only for DC load less 5A current.
Warming tips: Make sure the Voc of PV meeting the requirement as right. Voc is 1.5 times of Battery voltage will be the best efficiency.

Feature:

Charging 3-stage:constant current(MPPT), constant voltage(Absorption Voltage), floating charge
Selectable battery type Vented/ Sealed / Gel / NiCd / Lithium battery (default is Sealed) (defined voltage for other battery by user)
Soft start time ≤1S
Dynamic response and recovery time 100us
Max efficiency ≥98.1%
PV utilization ≥99%
In order to reduce the cost of electricity caused by high current, PV and battery each have two terminals

Input specification:

12V system: DC20V~DC80V
24V system: DC37V~DC105V
36V system: DC50V~DC160V
48V system: DC72V~DC160V

The maximum PV input voltage (Voc):DC190V
(The controller can t work at this voltage of long duration that will break controller. Please refer to Input voltage from PV.)

The maximum PV input power
(The total power rated of PV can t be over this watt that will break the controller.)
12V system (720W) ;
24V system (1440W) ;
36V system (2100W);
48V system (2800W) ;

Output specification

Overcharging protection voltage:
12V system (15V);
24V system (30V);
36V system (45V);
48V system (60V);

Air circuit breaker and wires requirement

copper wires:9AWG
air circuit:100A
Notes: The output terminal is for lamp only ( 12V system less 60W, 24V/36V/48V system less 100W ),and it will be burnt if connecting to other loads. The output for battery is no polarity reverse protection.

Package including:

1XMPPT Solar Charge Controller
1XEnglish Manual