RamPro 16-Piece Punch and Chisel Set | Kit Includes: Steel Pin, Taper, & Center Punches, with Cold Chisels and Chisel-Punch Gauge | Perfect for Metal & Wood Work

Description

About Ram-Pro Chisel & Punch Kit

Get 1 Multipurpose Kit for all your punch & chisel needs!

Kit includes all the common size punches & chisels you ll need to start, align, punch & mark holes into wood or metal to get the job done fast & accurate.

INCLUDED:

-5 Pin Punches:

#1 3/32 x ¼ x 4-1/4
#2 1/8 x 5/16 x 4-3/4
#3 5/32 x 3/8 x 5
#4 3/16 x 3/8 x 5-1/4
#5 ¼ x 7/16 x 5-3/4

-5 Taper Punches:

#1 3/32 x 5/16 x 5-1/4
#2 1/8 x 3/8 x 5-3/4
#3 5/32 x 3/8 x 6
#4 3/16 x 7/16 x 6-1/4
#5 ¼ x 7/16 x 6-3/4

-3 Cold Chisels:

#1 3/8 x 5/16 x 5-1/2
#2 ½ x 7/16 x 6
#3 5/8 x 15/32 x 6-1/12

-2 Center Punches:

#1 1/8 x 5/16 x 5
#2 3/16 x 7/16 x 6

-Chisel-Punch Gauge

USES:

Pin Punches:
Use a Pin Punch to drive out broken bolts or pin fasteners until it is ejected from the hole.

Taper Punches:
Use to align holes through which rivets, pins, or bolts will be inserted.

Cold Chisels (Blacksmithing):
3 various sizes Sharp double edged 60 degree Chisels designed to create fracture lines & accurately splitting metal chains, damaged bolts & iron objects.

Center Punches:
Effectively make indentations & marks in metal rings or block sheets before drilling holes, & it helps to recess the bit on drilling point.
You can use this to transfer dimensions from a paper pattern directly onto metal.

Chisel-Punch Gauge:
60 Degree Gauge used to check the striking ends of the tools.

Use the punches to get automotive tires off car/truck rims or disassemble pallet jacks.

Use chisels to split & crack metal chains or rusted nuts.

Spread knuckles to remove ball joint studs, drive out pins & bolts, & remove stubborn brake rotor screws.

Always wear safety goggles when working with metal.

Split Resistant:
All the punches & chisels are split resistant due to its chamfered construction on the hammer striking end.

The Mechanics and Metal Workers Favorite Kit!