The Clap Sound Activated On/Off Light Clapper Switch Motion Detector

Description

Clap to turn on/off lights.

The clap detection lights will glow with a proper clap or similar sound.

Sound sensitivity: More sensitive when turning the dial to HOME, less sensitive when turning the dial to AWAY.

While in the HOME mode, The Klapper allows its user to activate one or two appliances using sequences of claps

While in AWAY setting, the switch can serve as a limited function security device intruder.

It s also convenient for temporarily turning on a light when entering a dark room such as a garage or a basement.

You can adjust your switch to respond to soft or loud claps as well as adjusting for the noise level in your room.

The three lights on the face of the switch will help you determine the proper way to clap your appliances on or off, each clap detection light will grow when a proper clap or a similar sound is detected.

Instructions: How to operate an appliance with claps:
1-Set Sensitivity Dial to HOME Plug appliance into left receptacle(below the "II") for 2 claps and right receptacle for 3 claps
2-Plug switch into the wall socket.
3-Manually turn appliance on -- the indicator light to the left of the "II" will glow when the appliance has been manually turned on, but is clapped off.
4-You can now turn on
3-Manually turn appliance on -- the indicator light to the left of the "II" will glow when the appliance has been manually turned on, but is clapped off.
4-You can now turn on or off by clapping.

The clapping sequence is more important than how loudly you clap when each pause is approximately 1/2 to 1 second long,

To turn on the left receptacle the three pauses after the second clap are very important since the switch must determine that you are not going to clap a thi