Truly Isolated Pedals Power Supply, Mefe MP-2 Guitar Effect High Current DC 8 Truly Isolated Output for 9V/12V/18V Effect Pedals

Description

The MEFE Pedal Power Supply MP-2 (with stable and strong metal cover ) requires an 12V regulated power supply rated at 2000mA, with 5.5mm x 2.1mm positive barrel, negative center plug, lightweight and portable. Wide Range of wall power: From 100-240V at 47-63Hz.

8 ways true isolated outputs:

--6 ways 9V 300mA

--1 way 12V 300mA

--1 way 18V 300mA.

Connection:

· Included cables use industry standard 5.5mm x 2.1mm positive barrel,negative center polarity plugs.

· Each output features a blue LED. When lit, this LED indicates a good connection. If short-circuited or overloaded, this LED will turn red.

· Combining Outputs:Any output may be combined with any other output when stacked in series. If combining outputs in parallel, only outputs of the same voltage maybe used together.

Note: 

· Some pedals may be damaged if powered using a voltage that exceeds the level required by the manufacturer, e.g. powering a 9V pedal with 15V or 18V.

· We highly recommend staying at or below manufacturer s state voltage requirement. Mefe assumes no responsibility or liability for equipment damage caused by misuse of the MP-2 Power Supply.

Package Included:

· 1 x MP-2 Power Supply

· 1 x 12V/2000mA AC Adapter

· 8 x 5.5mm x 2.1mm DC Power Cable

· 2 x Polarity Reversal Cable

· 1 x User Manual