WS-GPOE-12-48v120w gigabit 12 Port Power over Ethernet Injector passive POE for 802.3af devices

Description

Remove clutter in your installations, replace up to 12 individual power over ethernet injectors with this single gigabit POE module.

Rack Mounted PoE injector

Extend power to 328 ft or 100 meters

This device offers
* 12 shielded RJ45 jacks with Data + Power out
* power per port limited to 650 ma
* 12 shielded RJ45 jacks Data in - connect to your switch
* 2x 2.1mm x 5.5mm DC power jacks - primary and secondary DC power
* LED power status
* LED power usage status per 4 ports
* 10/100/1000 operation
* 48v 120watt power supply, 100-240v, 50/60 hz
* add a 2nd power supply for redundancy
* we offer 7 different power supply options

Used to provide PoE power to:
* IP phones like Polycom, Cisco, Yealink
* WiFi Access points
* IP Cameras
* 802.3af devices

These devices provide power on the data lines 1 and 2, and 3 and 6. This is 802.3af mode A. All devices receive the same voltage - choose a power supply with more available power than the total all devices. Check device specs for power needs, it is under 4 watts for most Phones, other devices need more

We offer 18v, 24v and 48v supplies, with 60 and 120 watt versions, also 6 port versions.

LED status show power for all 12 port, and for each group of 4. For each group of 4 port an LED indicates:
Port current 0 to 20ma = LED off
Port current 20 to 400ma = LED is green
Port current >400ma = LED is red

Full details and data sheet at http://wifiqos.com/

Uses a 2.1mm x 5.5mm DC connector times 2, connect 2 power supplies for redundant operation. We also stock 12v to 48v power supplies, and lower cost 100mb versions.