YUMSEEN High Accuracy Digital Tire Pressure Gauge (0~150 PSI),Lighted Led Lcd Display,Best For Car & Motorcycle

Description

HELPFUL HINTS

In order to get a strong seal, place the nozzle directly onto the tire valve. Putting the gauge on the nozzle from an angle could result in an inaccurate reading. Once the gauge is placed, firmly press the gauge straight down.

Maintain correct tire pressure

●Reduce tire wear and tear
●Extend lifetime of tires
●Increase fuel efficiency
●Improve vehicle handling and safety
●LCD backlit display
●Auto-off


SPECIFICATIONS

●Pressure Resolution = .1 psi

●Accurate within = +/- 1%

●Four units of Measurement = PSI, BAR, KPA, KG/CM2,Range: 0-150 PSI / 0-10 Bar / 0-10 Kgf/cm2 / 0-1000 Kpa

●Display: 21 x 10mm LCD display

●Power: 3V Lithium coin cell

●Operating Temperature: -5~50°C / 23~122°F


INSTRUCTIONS

●Press the "ON/UNIT/OFF" button. Wait for the gauge to beep and display zero on the LCD screen.
●Place the nozzle of the gauge on the tire valve. Press firmly to ensure a good seal and prevent air escaping.
●Hold gauge on the valve until the threading on the LCD display locks.
●Remove the gauge to easily see the pressure reading.
●To retake the pressure, simply repeat the previous steps.
●Tire gauge will automatically shut off shortly after use. Gauge can be manually turned off by holding the "ON" button down for more than 3 seconds.